A problem with your heat pump nz can make you feel hopeless, especially if it’s the only way you can heat or cool your home. Most of the time, people are quick to call a maintenance expert to figure out what’s wrong with the pump and fix it, even though they can handle most problems on their own.
That being said, it is important to know the most common reasons why a heat pump stops working. This way, you can fix it yourself and save money in the long run. You can also learn how to take care of it so that it doesn’t break down all the time.
First of all, let’s figure out what the most common problem is with a heat pump that isn’t working right before we move on to how to fix it. Here are some of the most common problems and how to fix them;
Table of Contents
1. Heat Pump Won’t Turn On
This heat pump problem could be caused by a problem with the thermostat or the power. Check the thermostat to see if it needs to be changed or if it is broken and needs to be replaced. If a replacement was just done and the pump still doesn’t work, the piece that was used to put the pump in place may be the wrong kind. You’ll need to find the right spare part.
In terms of power, check to see if the heat pump is getting it. If the heat pump won’t turn on, make sure that the power socket is on. If the power is on and it’s still not working, check to see if the heat pump’s fuse has been tripped or blown.
If the fuse is the problem, you may need to reset it or replace it. As a safety measure, make sure to turn off the power first.
2. Can’t Heat Or Cool Properly
First, make sure you’ve set the thermostat to the temperature you want. If the heat pump still isn’t working right after this, make sure the vent cover is open so air can flow through. You can move them so that the air flows toward you or to the part of the room that needs to be heated. Check your coils to see if they are working. Most of the time, a dirty coil or fan is to blame when a heat pump doesn’t cool. See if it makes a difference if you clean them up. Also, check to see if the air duct or air handler is blocked and clear it out.
You can also replace the pump’s extra heating elements if they can’t be fixed. Make sure you get parts that fit your heat pump’s brand and model.
3. The Heat Pump Fan Doesn’t Work Or It Freezes Up And Trips The Circuit Breaker.
If the blower doesn’t work, it could be because the belt is broken. Buy a new belt to make sure the link between the motor and the pump blower works. It’s almost impossible to fix a broken belt, so you’re better off buying a new one.
If the weather is too cold, it is normal for your heat pump to freeze. If the defrost cycle doesn’t run on its own, turn it off so the condenser unit can defrost. Also, make sure that none of the air vents are blocked and that the air filter is clean.
4. The Heat Pump Doesn’t Work Right
If the heat pump turns on and off often, it might be because of the thermostat. Either the thermostat is not set right, or something is wrong with it. You can fix this either by recalibrating the thermostat or by getting a new one.